PRODUCTION decorative items made of colored concrete:
4 technology just for one price !!!
In this tutorial we will teach you how to produce unique in quality and colors of colored concrete products. Products are really unique. The technology allows you to quickly and simply reproduce any texture of natural stone. In addition, you can come up with its original coloring. Product Specifications Still unique:
Compressive Strength - 40 - 70 MPa (according to GOST - 20 MPa)
Frost resistance - 200 cycles of freezing - thawing (the requirements of GOST - 50 cycles)
In central Russia during the winter period is usually about 10 cycles of freezing - thawing.
Thus, your products must be subject to the technology with confidence to stand for about 20 years.
Doubt and everyone who comes - shows the objects of federal importance, on which our paving slabs laid seven years ago. Her impressive quality and safety of all !!
Water absorption: no more than 1% by weight (GOST requirements - up to 8%)
This feature is extremely important for the durability of manufactured concrete products. The lower the water absorption, the higher the resistance to frost, and hence the life of the finished product.
Abrasion - 0.4 - 0.8 g / cm 2 (GOST requirements - 2.2 g / cm2)
These characteristics are the main contact in the manufacture of concrete products. In addition, it should be noted that the technology produced by our concrete products are gloss when you exit from the form that is comparable, except that only the product that is long and expertly polished and varnished.
Many of our technology compared with SISTROM technology, Dekostoun, Arhistoun and find that they are very similar, and in the production and quality of finished products. The thing is that the technology is very related. We know the products manufactured by the above-mentioned technologies, and assure you that our products are not worse than any of the characteristics or appearance, and sometimes much better.
Pros and differences we described the technology:
The technology is suitable for all forms existing in the market
The technology is not used granite screenings
Using the technology of production of concrete products granite dropout rate is very inconvenient for several reasons:
1. Search for the desired fraction granite screenings in your area (respectively - the price is added to the finished product)
2. Significant reduction in divergence form
And most importantly - because there is a difference - held form 5-stripping fill cycles or 50 cycles. Agree - the difference lies in the cost of the product. For those who decide nevertheless to produce concrete with a granite screenings (if you decide that it is stronger and more specifically for manufacturers in Ukraine, where the sand is almost impossible to find) - please. Attached to benefits, another technology - Manufacture of concrete products using granite screenings. Rest assured - this is another little independent technology.
The technology allows to reproduce virtually any color and texture of the concrete product
The unique strength of the finished products
The technology does not require any additional equipment, except 1) Concrete 2) vibrating table 3) Form
Production of finished products can be organized within a week
The cost of finished goods is - 1 part cement + 2 parts sand and 3 + small amount of money on supplements.
01.01.2012 The cost of supplements is 80-90 cents !!! 1 kg of finished product.
The technology is suitable for reproduction as the large industrial enterprises, and private traders are literally in a garage.
Production of decorative elements and paving slabs on technology Deco - stone, Sistrom, Arhistoun and others, allowing to make decorative items trouarnye plates, unique façade cladding, ...
+ Bonus - there you will find out what else can be done by having the required equipment. We do not mean the standard concrete technology - foam