Drawings pyrolysis boiler BLAGO at 35-100kvt.

Affiliates: 6 $ — how to earn
Pay with:
i agree with "Terms for Customers"
Sold: 1
Refunds: 0

Uploaded: 19.05.2011
Content: 10519122229483.rar (576,12 kB)

Seller

blago-tt information about the seller and his items
offlineAsk a question

Seller will give you a gift certificate in the amount of 574,71 RUB for a positive review of the product purchased..

Description

Pyrolysis boilers designed for heating of industrial and residential premises. Used fuel - wood. Fuel moisture to 75%. Burning in the intensive burning mode - up to 20 hours. In the support combustion - 2 days.
It provides the greatest efficiency of the combustion of wood. The principle of pyrolysis fuel combustion: first carried out gassing fuel and then, post-combustion of unburned pyrogas.
In it, the upper part of a heat exchanger, where the hot water is supplied to the battery.
Provided for settling the combustion chamber fireclay brick.
There is a patent for the invention. The boiler has shown himself quite efficient, with good technical and economic indicators. The boiler can be operated with natural air circulation, so forced.
Drawing just 68 sheets, A4, file format - ipg. There specification and explanatory note.

Additional information

The basis of the principle of pyrolysis boiler combustion pyrolysis (or dry distillation) of fuel. The bottom line is what it is. Under the influence of high temperatures and lack of oxygen in a dry wood decomposes into volatile part - the so-called pyrolysis gas and a solid residue - charcoal (coke). The pyrolysis of wood is carried out at a temperature of 200 - 800 ° C. boilers with fully insulated retort or dome designs. In this case, the resulting pyrolysis gases accumulate under the dome, and only then go to the post-combustion. This process is exothermic, that is going to generate heat, thereby, incidentally, improves the heating and drying of the fuel in the boiler, and heating takes place the incoming combustion air. The mixing of air with oxygen precipitated pyrolysis gas at a high temperature combustion process causes the latter, which is then used to generate heat energy. The difference for the consumer is what it is. In the case of operation of the traditional "classical" solid fuel boilers solid fuel loading takes place every three to four hours. In the case of pyrolysis boiler, the time between loads, in contrast to the "classic" increased by 2 times or more. It should be noted that the pyrolysis gas from the combustion process reacts with active carbon, whereby the flue gases leaving the boiler are substantially free of harmful impurities, being for the most part, a mixture of carbon dioxide and water vapor. CO of a boiler will emit up to 3 times less than a conventional wood and especially coal-fired boiler. Therefore Pyrolysis boilers are more environmentally friendly. Also formed during the pyrolysis combustion minimum amount of soot and ash, boiler therefore less than usual needs to be cleaned. High efektivnost boiler (efficiency 81-92%) in an adjustable power range of 30 to 100%.
In contrast to classical conventional boilers burning whose real efficiency in the operation actually does not exceed 50%, and the ability to adjust the power or completely absent or very, very limited.
Savings in fuel consumption to 40% compared to conventional boilers. .
Pyrolysis boilers due to its construction, achieve low emission values \u200b\u200bof emissions that complies with standards of Eu-3 (Euro-3)). The level of CO (carbon monoxide) below 500mg / m3, which allows you to sell Pyrolysis boilers throughout the European Union without any restrictions.

Feedback

0
No feedback yet.
Period
1 month 3 months 12 months
0 0 0
0 0 0
Seller will give you a gift certificate in the amount of 574,71 RUB for a positive review of the product purchased..
In order to counter copyright infringement and property rights, we ask you to immediately inform us at support@plati.market the fact of such violations and to provide us with reliable information confirming your copyrights or rights of ownership. Email must contain your contact information (name, phone number, etc.)